CALL TODAY!

1-800-442-3274

1-248-740-2727

ECP Hardware
Large Metal Lift-Off Hinges, In-Line Style
There are no products available in this category.

Detailed Product Information

Installation Info

DOOR & FRAME PREPARATION:
Note:
Note: To insure lift-off capability, the lower knuckle must be installed on the frame, the upper knuckle on the door.

Note: For non lift-off mounting use one type “A” and one type “B” hinge per door. One hinge knuckle must be mounted AFTER the door is hung.


Maximum screw length = door (or frame) thickness + 5 (.200). (Screws not supplied). For door to open a full 180°, one of the two dimensions, R or S, must be less than 19.9 (.782).


Materials & Finish

KNUCKLES: Die-cast zinc, black powdered coating.

WASHER: Black nylon.

Strength Guidelines

RADIAL
Maximum working load - 1300 N (300 lbs.)
Average ultimate load - 3300 N (1000 lbs.)

AXIAL
Maximum working load - 2200 N (500 lbs.)
Average ultimate load - 9300 N (2100 lbs.)